EN20471 and ANSI 107 Standard of Safety Vests
For the minimum area of fabric and reflective material, EN20471 and ANSI 107 have the same standard. See below chart:
Material | 1 class safety clothes | 2 class safety clothes | 3 class safety clothes |
Fabric | 0.8sq.m. | 0.5sq.m. | 0.14sq.m. |
Reflective material | 0.2sq.m. | 0.13sq.m. | 0.1sq.m. |
For the distance between reflective tapes, the width of reflective tapes and the design of the Safety Vests, EN20471 and ANSI 107 have the different standard.
1:The distance between reflective tapes should not be less than 5CM. ANSI 107:the distance between reflective tapes should not be less than the width of reflective tape.
2:The width of fabric and reflective material should not be less than 5CM. ANSI 107:for 3 class safety clothes, the width of reflective tape should not be less than 5cm.For 2 class safety clothes ,the width of reflective tape should not be less than 3.5cm.For 1 class safety clothes, the width of reflective tape should not be less than 2.5cm.
3:For the vest, if there are two vertical tapes, then it must have one horizontal tape. If there is no vertical tape, then it must have two horizontal tapes.
ANSI 107:
For coverall, there should be two horizontal reflective tapes. For jacket, reflective vest, and raincoat, there should at least be one horizontal and two vertical reflective tapes. For long sleeve clothes, coverall without sleeve and pants, need two tapes on the legs.